This product is an 8-inch Carbon Fiber Car Speaker, a high-power car subwoofer: 8-inch in size, peak power 1200W, continuous power 300W, 2Ω + 2Ω impedance suitable for multi-power amplifiers; frequency response 37Hz - 1200Hz, 87dB sensitivity ensures low-frequency performance. The core uses a Φ61 copper-clad aluminum voice coil, carbon fiber diaphragm and 102.5oz magnet.
This 8-inch Carbon Fiber Car Speaker is a car subwoofer built to crank out thunderous bass. It’s an 8-inch unit that handles 1200W of peak power (and 300W of steady output), plus it uses a 2Ω+2Ω dual-impedance setup—so it plays nice with all kinds of amplifiers.
Its frequency range hits 37Hz up to 1200Hz, serving up that deep, chest-thumping low end you want. At 87dB sensitivity, it keeps the bass dynamic even when you turn it up. Under the hood, there’s a Φ61 copper-clad aluminum voice coil, a carbon fiber cone (tough enough to cut distortion), and a beefy 102.5oz magnet that pumps out the drive.
Product Advantages
Key features of the core material of this product:
Voice coil: Utilizes Φ61 copper-clad aluminum wire, balancing high conductivity with lightweight design, suitable for 1200W high-power conditions;
Diaphragm: Selects carbon fiber material, featuring high rigidity and low deformation characteristics;
Magnet: Equipped with a 102.5oz large-sized magnet, providing strong driving force for the voice coil, enhancing the depth and power output of low frequencies.
Parameters
Model
TL-8-D2
Midspeaker size
8“
Max Power
1200W
RMS Power
300W
Impedance
2Ω+2Ω
Frequency
37Hz-1200Hz
Sensitivity
87dB
Voice Coil
Φ61ccaw wire
Mounding Depth
151mm
Magnet
102.5oz
Cone
CarbonFiber
Weight
7.6kg
Why choose us?
By choosing our products, you can enjoy:
Installation adaptation: Provide suggestions on the installation layout based on the vehicle's trunk and other spaces;
After-sales guarantee: Support 7-day no-reason return and exchange (as long as the packaging is intact), 1-year warranty covering material and workmanship faults;
Technical support: Professional team provides remote guidance on wiring, bass tuning, etc.;Customization service: Can add accessories such as shock absorber pads as per your needs.
Product Usage Instructions
When using this product, please be aware of the following:
Power matching: Avoid connecting to amplifiers with power exceeding 1200W;
Impedance adaptation: Select 2Ω or 2Ω + 2Ω mode based on the amplifier;
Installation protection: The carbon fiber diaphragm should be protected from sharp objects to prevent scratches; During installation, it must be firmly fixed;
Space adaptation: A 151mm installation depth requires sufficient space in the vehicle;
Environmental moisture prevention: Avoid being in a humid environment for a long time.
Tell us your requirements for trailer light, trailer wiring, trailer component. Our team will reply quickly with professional solutions and competitive quotes.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.Privacy Policy